At Action Sports we carry a variety of tip fill material including Durasurf and ABS types
Our new SK-3000 40 ton Longboard and Skateboard press sets the new price/performance standard...
This video features a brief overview of SnoCAD-X ski and snowboard CAD design software.
SnoCAD-X is available from Grafsnowboards.com or you can email us and we can send you the runtime files - see our contact page for details on how to reach us.
Need more capacity in a limited space? Don't have the budget for 2 separate presses? The IF-3000 DC/LC is the answer. The IF-3000 DC/LC is our top of the line dual cavity ski and snowboard laminating press.
It is for the demanding user that the needs the utmost capacity. Press 2 snowboards or 2 pair of skis at the same time in the same press. This press is our most fully featured dual cavity production laminating press that is based on the presses Lindsay designed for Powderstick Snowboards, Option Snowboards and dozens of other companies since the mid 1980's. It features heated top and bottom forms that are controlled by a digital PID control unit that allows various ramp and heat cycles to be programmed or simple set temperature operation.
The daily capacity of the IF-3000 DC/LC is dependent on the operating temperature and the cure time of the resin system used. Typically this is 6 - 8 boards per hour (3-4 per cavity) or 4 - 6 pair of skis hour ( 2 - 3 per cavity) based on 60-70 degree C temperature using the Action Sports Extreme epoxy system and depending on the complexity of the layup. Other epoxies will vary in terms of cure time and can allow faster or slower cure cycles and resin pot life.
This machine features an all steel I-beam "Lift Cylinder" frame design (hence the LC designation) that enables us to make a very stiff, high performance frame when space and weight are not as much of a concern. The Lift Cylinder frame design allows the operator to lift the top beam up approximately 75mm in addition to the normal cavity opening when not inflated to allow super easy cleaning, loading and adjustments. This is where the LC design shines, as often times loading, cleaning, maintenance and size adjustments can take a lot of time. The lift cylinder design allows easier access and saves time in all these areas.
The IF-3000 DC/LC ski and snowboard press features an all pneumatic "air bladder/caterpillar track" top form assembly for unlimited ski or board thickness profiles, adjustable length, various camber and rocker profiles and more (1 rocker/camber profile included, others can be ordered).
Standard Specifications (we can build to other specs please inquire):
Typical 220 volt single phase configuration $17,995. Other options, custom dimensions and International electronics are available, please inquire.
So you want an all in one ski/snowboard lamination press that also features a built in sublimation heat press? Our IF-2500 DFC/S is the answer.
Time is Money and the IF-2000 LC is designed to be fast. The IF-2000 LC is our high end single cavity ski and snowboard laminating press.
The IF-2000 FC is our mid range production ski and snowboard laminating press.
This video demonstrates basic setup and export of various ski or snowboard files from Snocad to Sheetcam for cutting parts or templates on the Action Sports Technology CNC Multicutter or similar CNC router.
At Action Sports we specialize in all aspects of extreme sports manufacturing and technology.
We have been building and selling machines and equipment for the ski, snowboard, skateboard, wakeboard and other industries through the SnoboardMaterials.com and Custom-Shop.com websites for 15 years, and our company founder Lindsay Rogers has been manufacturing skis and snowboards for more than 30 years, and factories he has set up have manufactured well in excess of 100,000 snowboards.
We offer several different standard models of presses and vacuum molds and also specialize in custom built machines, so if you need something special for your designs do not hesitate to contact us so we can build something to your specifications.