Foil/VDS

Foil/VDS

Natural Vulcanized rubber foil (sometimes referred to "VDS") can be an important component in some composite layups.

Most commonly used for enhanced bonding between the steel edges and bottom fiberglass layer, but it can also be used strategically throughout the board or ski to dampen some frequencies resulting in smoother, chatter free performance on hard snow. Some lab tests indicate as much 400% improvement of bonding vs no foil used.

Qty

Material Type & description (click links for info)

 

Price $

       
       

NEW!!  1/2" wide x 0.2mm thick NATURAL (off white) Rubber VDS (order number of metres as quantity. typically 4  meters board board, 8m per pair of skis)

$0.95/m
lower price!

NEW!!  3/4" wide x 0.2mm thick NATURAL (off white) Rubber VDS (order number of metres as quantity. typically 4  meters board board, 8m per pair of skis)

$1.25/m
lower price!

NEW!!  1/2" wide x 0.2mm thick Grey  Rubber VDS (order number of metres as quantity. typically 4  meters board board, 8m per pair of skis)

$0.95/m
lower price!

NEW!!  3/4" wide x 0.2mm thick Grey  Rubber VDS (order number of metres as quantity. typically 4  meters board board, 8m per pair of skis)

$1.25/m
lower price!

1" wide x 0.2mm thick BLACK Rubber VDS (order number of metres as quantity. typically 4  meters board board, 8m per pair of skis)

 

$1.95/m
lower price!

       
 

Please note: some countries do not allow USPS shipments of cores because the box is too big. If you are ordering cores from overseas, please email for a quote first. We may have to use another carrier.

   
       
       

 

Recent News/Articles

  • New 2018/2019 ski and snowboard materials in stock

    We just received a shipment of our new 2018/2019 snowboard cores, ski cores, blanks and sidewalls.

    The new snowboard cores feature new twin tip flex profiles as well as a new 20 hole "Bullet Pack" binding insert pattern. We are also offering 4 types of pre-tapered ski cores for easy incorportation in your ski designs. Check em out on the cores page!

  • Introducing our CNC Multicutter - CNC Router with blade

    Introducing our new CNC Multicutter CNC router with blade cutting attachment - Hand built in our facility in Los Angeles California.

    The CNC Multicutter is a medium format CNC router and blade cutter with a cutting area of 80" x 16" (2130mm x 406mm) up to 96" x 48" (2032mm x 1220mm) depending on the configuration. Standard sizes are 80" x 16" and 80" x 24".

    We call it the Multicutter due to the cutting versatility the machine offers when combining a traditional spindle for routing and milling tasks with an interchangable Donek blade cutter that allows a variety of other cutting tasks wih thin materials that would otherwise not be possbile on a traditional machine.

About

  • 1

    SnowboardMaterials.com was formed in 1998 as a division of Custom Shop Snowboard in Toronto, Canada, by longtime snowboard industry veteran Lindsay Rogers.

    Read More
  • 1

    Our Products - Action Sports and SnowboardMaterials.com continue to develop new and exciting Machinery, Materials and Products

    Read More