Tip Fill Material for skis and snowboards

Tip Fill Material for skis and snowboards

Tip fill material for skis and snowboards.

Commonly used in the tip and tail of skis and snowboards to extend the length of the core, seal from water damage and in some cases to change the flex and damping characteristics in the tip and tail.

Qty

Material Type & description (click links for info)

 

Price $

       
       

Black UHMW (P-tex) tip fill 2mm thick x 340mm wide x 50cm piece  - (one 50cm piece is enough for one tip and one tail tip fill piec e in a typical snowboard, or two tip and two tail pieces in a pair of skis)

$19.98 per 50cm piece

out of stock

White UHMW (P-tex) tip fill 2mm thick x 335mm wide x 50cm piece  (one 50cm piece is enough for one tip and one tail tip fill piec e in a typical snowboard, or two tip and two tail pieces in a pair of skis)

$13.00 per 50cm piece

Blue ABS tip fill 2mm thick x 320mm wide x 50cm piece (one 50cm piece is enough for one tip and one tail tip fill piec e in a typical snowboard, or two tip and two tail pieces in a pair of skis)

blue abs tip fill

$10.50 per 50cm piece

Red 485c UHMW (P-tex) tip fill 2mm thick x 340mm wide x 50cm piece (one 50cm piece is enough for one tip and one tail tip fill piec e in a typical snowboard, or two tip and two tail pieces in a pair of skis)

$13.00 per 50cm piece

Flourescent Green UHMW (P-tex) tip fill 2mm thick x 340mm wide x 50cm piece (one 50cm piece is enough for one tip and one tail tip fill piec e in a typical snowboard, or two tip and two tail pieces in a pair of skis)

$13.00 per 50cm piece

       
 

Please note: some countries do not allow USPS shipments of cores because the box is too big. If you are ordering cores from overseas, please email for a quote first. We may have to use another carrier.

   
       
       

Recent News/Articles

  • New topsheet material in stock November 2023

    New Topsheet materials in stock November 2023

  • CNC Multicutter v2 - CNC Router with optional blade cutter

    The CNC Multicutter is our new CNC router with optional blade cutting attachment for die cuts.

About

  • 1

    SnowboardMaterials.com was formed in 1998 as a division of Custom Shop Snowboard in Toronto, Canada, by longtime snowboard industry veteran Lindsay Rogers.

    Read More
  • 1

    Our Products - Action Sports and SnowboardMaterials.com continue to develop new and exciting Machinery, Materials and Products

    Read More