Ski and Snowboard Epoxy Resin

Natural Vulcanized rubber foil (sometimes referred to "VDS") can be an important component in some composite layups.

Most commonly used for enhanced bonding between the steel edges and bottom fiberglass layer, but it can also be used strategically throughout the board or ski to dampen some frequencies resulting in smoother, chatter free performance on hard snow. Some lab tests indicate as much 400% improvement of bonding vs no foil used.

Qty

Material Type & description (click links for info)

 

Price $

       
       
out of stock

Epoxy resin kit - approximately 30 ounces mixed, enough for one typical snowboard or pair of skis up to 165cm.  Resin mixes 4:1 - resin:hardener by volume. Pot life approximately 25 minutes at room temperature, set time approximately 8 hours at room temperature (24 hours recommended)

 

$48.95 ea

out of stock

Larger Epoxy resin kit - approximately 40 ounces mixed, enough for one typical longer snowboard or pair of skis 165 -190cm.  Resin mixes 4:1 - resin:hardener by volume. Pot life approximately 25 minutes at room temperature, set time approximately 8 hours at room temperature (24 hours recommended).

 

$59.95 ea

2 week lead time

5 gallon epoxy resin only - 5 gallon pail of epoxy resin, no hardener included sold below (approx 25 snowboards or pair of skis). Resin mixes 4:1 by volume. Pot life approximately 25 minutes at room temperature, set time approximately 8 hours at room temperature (24 hours recommended)

 

$769.95ea

2 week lead time

1 Gallon hardener only - mixes 4:1 by volume. Pot life approximately 25 minutes at room temperature, set time approximately 8 hours at room temperature (24 hours recommended)

 

$399.95 ea

       
 store cart

Please note: some countries do not allow USPS shipments of cores because the box is too big. If you are ordering cores from overseas, please email for a quote first. We may have to use another carrier.

   
       
       

About

  • 1

    SnowboardMaterials.com was formed in 1998 as a division of Custom Shop Snowboard in Toronto, Canada, by longtime snowboard industry veteran Lindsay Rogers.

    Read More
  • 1

    Our Products - Action Sports and SnowboardMaterials.com continue to develop new and exciting Machinery, Materials and Products

    Read More